- Home
- /
- Products
- /
- Stainless Steel
- /
- Stainless Steel 17-4 PH
Stainless Steel 17-4PH Products
Stainless Steel 17-4PH Equivalent Grades
| STAINLESS STEEL 17-4PH EQUIVALENT GRADES: | |||
|---|---|---|---|
| ASTM: | DIN: | JIS: | UNS: |
| SS 17-4PH | 1.4542 | SUS 630 | S17400 |
Chemical Composition 17-4PH
| CHEMICAL COMPOSITION 17-4PH : | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| GRADE: | C%: | Mn% | P% | S% | Si% | Cr% | Ni% | Fe% | Cu% | Cb+Ta% |
| 17-4PH | ≤0.70 | ≤ 1.0 | ≤ 0.040 | ≤ 0.030 | ≤ 1.0 | 15- 17.5 | 3 – 5 | REM | 3- 3.5 | 0.15 – 0.45 |
Mechanical Properties 17-4PH
| CHEMICAL COMPOSITION 17-4PH : | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| GRADE: | C%: | Mn% | P% | S% | Si% | Cr% | Ni% | Fe% | Cu% | Cb+Ta% |
| 17-4PH | ≤0.70 | ≤ 1.0 | ≤ 0.040 | ≤ 0.030 | ≤ 1.0 | 15- 17.5 | 3 – 5 | REM | 3- 3.5 | 0.15 – 0.45 |
Specifications Of SS 17-4PH
Form : Round Bar, Hex (A/F), Square Bar, Rectangular Bar, Hollow Bar, Etc
Standard: ASME: SA564, SA693, SA705, Type 630, ASTM: A564, A693, A705, Type 360, W. Nr./EN: 1.4548, AMS: 5604, 5622, 5643, 5825
Dimension Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Outside Diameter : 6.00 mm OD up to 450.00 mm OD
Length :6MTR, 20FT Or as per Requirements
End : Plain End, Beveled End, Threaded End, Flanged Ends
Outside Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests